SepticRecord

Benton County

Septic services in Holladay, Tennessee

Operators based within 12 miles of Holladay

Listed by where the business is, not by who it says it serves. Every operator here holds a current state permit, and the address it is placed by comes from the state's own published list — so this is a checkable claim rather than a service-area promise. A Tennessee installer permit is valid statewide, so operators further out can work here too; these are simply the ones closest to you.

Soil and septic suitability around Holladay

The USDA has already rated this ground for exactly one use: a septic tank absorption field. Within 4 miles of Holladay — 32,011 acres across 106 soil map units — it rates 99% of the land very limited for that use and 0.1% somewhat limited, and almost none with no limitation at all.

What the limitation actually is

A rating on its own tells you nothing you can act on. The reasons do, and around Holladay the leading one is depth to saturated zone on 54% of the mapped area, followed by seepage, bottom layer on 35.2%. In full:

Limiting featureShare of areaWhat it means on site
Depth to saturated zone54%A seasonal water table sits too close to the surface
Seepage, bottom layer35.2%The layer beneath the trench is porous enough that effluent could reach groundwater without being filtered
Slope31.8%The ground is too steep for a conventional field
Slow water movement19.1%Water moves through the soil too slowly for a drain field to keep up
Flooding17.4%The site floods often enough to matter

Shares overlap: most soils here are limited for more than one reason at once, so these do not sum to 99.1%.

The soils themselves

The named soils and land types that make up most of the ground around Holladay. Smithdale alone accounts for 26.1% of it.

Soil or land typeShareDrainageSlopeDepth to bedrockSeptic rating
Smithdale26.1% Well drained 5 to 60% None in profile Very limited
Providence16.5% Moderately well drained 0 to 12% None in profile Very limited
Iuka8.1% Moderately well drained 0 to 2% None in profile Very limited
Savannah7.1% Moderately well drained 2 to 15% None in profile Very limited
Luverne6.6% Well drained 8 to 60% None in profile Very limited

“None in profile” means SSURGO records no bedrock or other restrictive layer within the depth it describes, not that none exists.

What that means if you are building or repairing here

A seasonal water table

Some of the ground around Holladay carries a water table that rises close to the surface for part of the year and is nowhere to be seen for the rest of it. A field built into saturated soil does not treat effluent and does not drain, and the soil does not have to be wet on the day it is looked at for that to be true — the evidence is in the profile, as mottling and grey colours, which is one of the reasons the work is done by someone trained to read a soil pit rather than by timing water in a hole in August.

Karst, and why fast soil is not good soil

Part of the ground around Holladay is limited not because water moves too slowly but because it moves too freely: fractured limestone beneath the trench that carries effluent down to groundwater before the soil has treated it. Much of Tennessee's limestone country is karst — sinkholes, solution channels, springs — and a great many households here draw drinking water from private wells. A site that percolates beautifully can still be refused for exactly that reason, and the separation distances between a field, a sinkhole and a well are among the things a soil consultant is actually looking for.

Steep ground

A drain field has to be close to level. Effluent is distributed along a trench by gravity or by pump, and on a grade it runs to the low end, overloads it, and surfaces there. Around Holladay enough of the ground is steep that field placement tends to decide house placement rather than the other way round — the usable field area is often a bench or a shoulder some distance from the best building site, and the connection between them is a cost. It is worth knowing which part of a lot is the field before you fall in love with a view.

Area of interest: a 4-mile radius around the USGS Geographic Names centre point for Holladay (GNIS 1288045, 35.8706, -88.1459), chosen because five of this state's communities are unincorporated and have no boundary to use, and because the lots that need a septic permit are in the ring around a town rather than inside it. Soil from USDA-NRCS Soil Data Access, SSURGO interpretation “ENG - Septic Tank Absorption Fields”, area-weighted by mapped acreage and by each component's share of its map unit. Survey areas: . Retrieved 2026-09-09.

This is a survey, not a soil map for your lot. A permit needs a high-intensity map of the specific parcel, produced by a TDEC-approved soil consultant — see soil map vs perc test.

Permitting in Benton County

Septic permitting in Benton County is administered by the State of Tennessee, not the county health department. See the Benton County detail →